Filter
Top Products
LTC 8555 Series | Instruction Manual | User Information
EN
|
26
Bosch Security Systems | 29 August 2003
NOTES:
1. When using LTC 8900 systems, the access levels
required for this setting are 1 to 63.
2. Password is required to change this setting.
7. 7 Error Messages
The keyboard is designed to emit a short beep and
display an error number whenever Allegiant system
error messages are generated. Error messages are
generated for various reasons, including entry of an
erroneous key sequence or restricted function invocation.
Some errors contain more than one message. For
example, if an attempt is made to access a monitor or
controllable camera which has been locked by a higher
priority operator, the camera number is temporarily
replaced with an appropriate error number, then the
number of the operator who placed the lock is briefly
displayed.
Refer to the Installation manual supplied with the
Allegiant system for a complete listing of error messages
applicable to your model system.
No. Function Description Access Level
27. SELECT KEYBOARD LOG-IN 1
2
28. SELECT CONSOLE LOG-IN 1
2
29. RESET RS-232 PARAMETERS 1
2
30. SELECT CONSOLE RS-232 PARAMETERS
(except LTC 8900) 1
2
30. SELECT CONTROLLER RS-232
(LTC 8900 ONLY) 1
2
31.SELECT PRINTER RS-232
PARAMETERS (except LTC 8900) 1
2
31.SELECT CONSOLE RS-232
(LTC 8900 ONLY) 1
2
32. SELECT ALARM RS-232 PARAMETERS 1
2
33. DISPLAY USER NUMBER
AND PRIORITY Any
34. SELECT CAMERA CONTROL
INDICATOR 1
35. SET CONTROLLABLE CAMERA 1
36. SELECT CROSSPOINT DATA 1
37. USE PHYSICAL R/D ADDRESSES 1
2
38. SET EXPANDED PRINTER PORT 1
2
39. SELECT DIU INTERFACE PORT 1
2
40. SET SWITCHER PHASE DELAY
(LTC 8100, 8200, & 8300 only) 1
2
41. CAC HE REMOTE CAMERAS 1
2
42. KEYBOARD LOG-IN AUTO-OFF MODE 1
2
43. CPU BATTERY STATUS Any
99. LIST AVAILABLE USER FUNCTIONS Any