Filter
Top Products
6
Special Features of your BISSELL ProHeat
The ProHeat Self Propelled home cleaning system is the first and only
deep cleaner with a powerdrive. The Self Propelled feature allows
you to clean forward and backward using a minimum amount of
effort while maximizing cleaning.
Simply turn the Powerdrive Knob to the “ON” position.
Push the handle slightly forward to engage the
powerdrive in the forward motion and pull slightly back for
ease of motion on the backward pass.
The Powerdrive Knob may be turned to the “OFF” position
for transporting the machine, or for maneuvering around
delicate furniture.
The ProHeat is a home cleaning system that heats hot tap water and
automatically mixes it with BISSELL deep cleaning formula. The solu-
tion is heated as it is applied to the carpet. The combination of heat-
ed cleaning solution, powered brushes and suction provide a safe
and thorough method of cleaning.
Temperature control automatically heats the cleaning solution
as it is being applied to the carpet (*) to safely optimize
cleaning effectiveness.
The Power Switch on the handle controls power to the
machine; both switches must be ON ( I ) for SmartTemp
to work.
The SmartTemp Switch is found on the handle, near the
Power Switch. You may choose not to use the SmartTemp
feature if you are cleaning delicate wool or oriental rugs.
*SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
The SmartTemp Ready Light indicates when the heater is
ON ( I ). The heater should be turned on 2 minutes before
cleaning, to become fully warmed up and ready for
cleaning. It is found on the front of the handle where it is
easy to see while you clean.
SmartTemp increases the water temperature approximately
25° and will not allow it to exceed 180.°
SmartTemp
™
1.
2.
3.
4.
SmartTemp Ready Light
Self Propelled Powerdrive
The BISSELL SmartClean
™
System
1.
2.
3.