Filter
Top Products
SmartMix
Tank
7
SmartMix
™
Provides custom solution control for each cleaning job.
Lift the SmartMix concentrate tank up and out of the
machine base.
Turn the tank over so that the valve cap is in an upward
position. Unscrew the valve cap and fill the tank to the fill
line with BISSELL deep cleaning formula.
Replace the valve cap turning until snug.
Replace SmartMix concentrate Tank.
Choose the SmartMix setting that fits the cleaning job.
Water Rinse / Carpet Protector -This setting
must also be used when applying the carpet
protectant through the applicator, to prevent the
pump from temporarily losing its prime.
Normal- automatically provides the best mix of
water and concentrate for most cleaning jobs.
High Traffic- automatically mixes the right amount
of water and concentrate to dissolve tough grime
and heavy soil. Note: Residual cleaning materials left
in carpet from other products may cause excessive
foaming when picked up. If foam is overflowing
tank, move SmartMix Dial to “Water Only” position
until the condition stops.
Note: Both the SmartMix Tank and the clean
water tank must have liquid in them for
the machine to spray. If one tank is empty,
the machine will temporarily lose its
prime and not apply either cleaning
solution or water only.
The powered brush roll at the floor nozzle is designed to
enhance cleaning performance. The bristle pattern lifts out the
deep down dirt while gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights and protects
your carpet if you leave the power switch ON ( I ). When the
machine handle is in the fully upright position, Carpet Saver
™
automatically raises the brush off the carpet.
4.
5.
1.
2.
3.
Tip:
Deep Cleaning
stairs and high
traffic areas on a
regular basis and
using the
Scotchgard
protector can
prolong carpet
life.
DirtLifter
™
PowerBrush
WARNING:
To reduce the risk of fire,
use only BISSELL Deep
Cleaning Formula for full
size machines in your
ProHeat. Use of cleaning
formulas which contain
lemon or pine oil may
damage this appliance
and void warranty.
Chemical spot cleaners or
solvent based soil
removers should not be
used. These products may
react with the plastic
materials used in your
ProHeat, causing cracking
or pitting.
SmartMix
Dial
D
H
I
G
H
T
R
A
F
F
I
C
W
A
T
E
R
R
I
N
S
E
/
C
A
R
P
E
T
P
R
O
T
E
C
T
O
R
N
O
R
M
A
L