Filter
Top Products
12
Replace Drive Belt Continued
Place ends of Rotating Floor Brush down into
slots on sides as shown.
Turn Rotating Floor Brush by hand several times in
direction of Motor Pulley. If properly installed, Drive
Belt will center itself on Rotating Brush crown.
Reposition Brush Cover and four screws. Tighten
screws securely.
Use only BISSELL Replacement Bulb (#203-1007)
in your BISSELL PowerGlide.
Replace Lightbulb
Unplug cleaner from electrical outlet
Using a screwdriver, remove the two screws as
shown and lift off the lens.
Remove the bulb from the socket by pushing in
gently and turning it counterclockwise. Install the
new bulb by pushing it gently into the socket and
turning clockwise.
Reposition lens and secure with the two screws.
6.
5.
1.
3.
4.
2.
4.