Filter
Top Products
10
Cleaning Pre-Motor Filter
Unplug cleaner from electrical outlet.
The Pre-Motor Filter, located behind the grill in
the bottom of bag compartment, protects the
motor from dirt particles. If filter becomes dirty,
pull off grill and lift out filter.
Hand wash filter in cold water with mild
detergent, then air dry.
Reposition dry filter and grill.
Replacing Post-Motor Filter
Unplug cleaner from electrical outlet.
The Post-Motor Filter assists in the filtration process
to return clean air to the room. To remove this filter,
open the door on the side of the cleaner.
Grasp filter and pull it straight out.
The black Post-Motor Filter may be hand washed in
cold water with mild detergent, then air dried. The white,
pleated Micro-Lock and 3M Filtrete Post-Motor Filters
are not washable and must be replaced.
Reposition new filter by reversing this procedure.
How To Attach Filter Door
The filter door is designed with a "break away" feature,
which allows it to snap free if it is pushed open too far.
To reattach, align hinges of cover with slots on sides of
filter area.
1.
2.
3.
4.
1.
2.
3.
4.
Tip:
Do not operate
cleaner without
the Pre-Motor
Filter or
Post-Motor Filter
in place.
Use only BISSELL Style 7 Replacement Pre-Motor Filter
(#203-1013) in your BISSELL PowerGlide.
Use only BISSELL Style 7 Replacement Post-Motor Filters in your
BISSELL PowerGlide.
Style 7 Post Motor Filter (#203-1009)
Style 7 Micro-Lock
®
Post-Motor Filter (#32072)
Style 7 3M Filtrete
™
Post-Motor Filter (#32073)
5.