Filter
Top Products
S
Setting up the sewing computer16
C
D
E
B
Threading the upper thread
•
raise the needle and presser foot
•
turn the power switch to «0»
•
place spool on pin and attach the appropriate
spool disc – diameter of spool = disc size
•
take thread through rear guide A
•
then into slit of upper thread tension
•
pull thread down to the right of the take-up cover to B
•
then up to the left of the cover to C
•
and down through guides D and E
Refer to the safety
instruction!
A
C
D
E
C
135_145_S_engl 14.3.2003 15:33 Uhr Seite 16
030529.52.04_0303_a135 a145_EN