Filter
Top Products
Setting up the sewing computer10
The power cable
•
plug A into sewing computer
•
plug B into wall socket
Foot control cable
•
plug C into sewing computer
Important! (USA/Canada only)
This sewing computer has a
polarized plug (one blade
wider than the other). To re-
duce the risk of electric shock,
this plug is intended to fit in a
polarized outlet only one way.
If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrican to install
the proper outlet. Do not
modify the plug in any way.
The foot control regulates the
sewing speed
Sewing speed is adjusted by
applying more or less pressure
to the foot control.
Important! (USA/Canada only)
Use only foot controller type
SR-1 with sewing computers
activa 135 S/145 S.
Power cable
Foot control
Self storing cord
•
wind the cord on the reel
•
insert the plug into the groo-
ve provided
When sewing
•
unwind the cable
Power switch
The switch is on the handwheel
side of the computer
1 the computer is switched on
0 the computer is switched off
The sewing light is switched on
and off with the power switch.
Refer to the safety
instruction!
B
A
C
135_145_S_engl 14.3.2003 15:33 Uhr Seite 10
030529.52.04_0303_a135 a145_EN