Filter
Top Products
Setting up the sewing computer12
Winding the bobbin
•
turn power switch on
•
place empty bobbin on
spindle
•
following the direction of the arrow take thread through the rear
guide and round the pre-tension stud
•
wind it several times round the empty bobbin
•
press the engaging lever against the bobbin
•
press the foot control
•
the motor will stop automatically when the bobbin is full
•
remove the bobbin
Thread cutter
•
cut the thread on the thread
cutter
Winding the bobbin
Note:
When winding the bobbin
on the vertical spool holder
(p. 15), it may be necessary to
adjust the speed.
135_145_S_engl 14.3.2003 15:33 Uhr Seite 12
030529.52.04_0303_a135 a145_EN