Filter
Top Products
PureAV Power Console
12
Hookup and Installation
Step 5
Connect Digital Components to the Digital Filters
The PureAV Power Console PF50 has two isolated digital filters (Bank
01 and Bank 02); the isolated digital filters are optimised to clean and
condition the power to all of your digital components. The digital filters
also filter out noise created by digital components, such as DVD players,
and isolate your digital components from connected video, audio, and
high-current audio components.
A. Attach PureAV power cable labels to each component’s power cable
before you plug the cable into the sockets on the Power Console.
B. Connect the power cables of your digital components to any socket
labeled under the “Digital Filter”. Examples of the most common
digital components are listed below:
1. Digital Cable/Satellite Signal Box
2. HDTV/Digital Display
3. Digital Video Recorder (DVR) or Personal Video Recorder (PVR)
(for example, TiVo
®
)
4. DVD Player
5. CD Player
6. Digital Audio Tape (DAT) Player
Note: You can connect any type of digital component into any of the
digital filter sockets. You are not limited to the components
listed above.