Filter
Top Products
PureAV Power Console
Hookup and Installation
E. Trigger Out: The trigger-out function gives you the ability to
control an external device equipped with a remote trigger, such as
a retractable movie screen or projector, when the Power Console
is switched on. The 12-volt DC “OUT” port accepts a 3.5mm jack
cable. Set the “Trigger Out” switch to “Delayed” and the trigger-out
function will power an external device after a delay set by the “Delay
Time” switch (Fig. 2e). If you do not want a delay, set the “Trigger
Out” switch to “Switched”.
Note: This feature also allows you to remotely control multiple Power
Consoles using a Remote DC Control Cable. Simply connect the
Cable from the “DC OUT” to the “DC IN” port on another
Power Console.
9
Fig. 2
Fig. 2e
Fig. 2a
Fig. 2b
Fig. 2d
Fig. 2c