Filter
Top Products
2. Servicing the liquid cooling circuit
abc d e f
M
F
Image 2-16
3. Fill the pressure vessel with liquid as follows:
a) Couple th e syringe with the inlet of the cooling circuit.
b) Increase the pressure by pushing in the piston of the syringe (maximum 1 bar indicated on the manometer).
c) While pressing, expel air from the pressure vessel.
d) Continue exp elling air while pressurizing the circuit (up to 1 bar) until the valve of the vessel becomes hard to push in. This
indicates that the pressure vessel is completely filled with cooling liquid.
IN
Image 2-17
Expelling air of vessel
18 R59770032 COOLING LIQUID REFURBISHMENT 07/12/2006