Filter
Top Products
2. Lamp and Lamp House
Image 2-2
5. Take the Lamp House by its handles and pull it out of its com
partment.
Image 2-3
Note: While starting up the projector, the electronics detect if a Lamp House is installed. If no Lamp House is installed, it is not
possible to start up the projector.
2.2 Installation of the Lamp House
WARNING: The procedures below may only be performed by Barco trained and qualified technicians.
Necessary tools
7mmflat screwdriver
How to install the Lamp H
ouse?
1. Take the Lamp House by its handles and gently slide it in its compartment.
Tip: The compartment is provided w ith a guide to position the La mp House correctly.
Note: For a new lamp house, remove first the transportation nuts on the captive screws before inserting the lamp house in the
compartment.
6
R5905109 LAMP HOUSE WITH 2.5 KW LAMP 27/05/2014