Bacharach RDM800 Carbon Monoxide Alarm User Manual


 
SECTION 6
Powering Up the Monitoring System
(Warm up time is 15 minutes)
Start up checkpoints:
All buttons on RDM800 “chirp” when pressed. (Contact the factory if they do not “chirp”)
DO NOT plug any unused zones. During start up the software will pull a vacuum test to verify the
number of zones and a plugged zone will give a false count
Communication connection between HGM300 and RDM800
Check node address for the HGM300 (or multiple HGM300”s)
Terminator positions
13