AXIS Q6045-E Mk II PTZ Dome Network Camera
Hardware Overview
Hardware Overview
10
1
2
3
4
5
6
7
8
9
1
Hook for safety wire
2
Network connector (High PoE)
3
Ground screw
4
Unit holder (3x)
5
Part number (P/N) & Serial number (S/N)
6
Power button
7
Heater
8
Control button
9
Status LED indicator
10
SD card slot (SDHC)
Connectors and Buttons
For technical specications, see page 61.
Network Connector
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
NONO
NO
TICETICE
TICE
Use the supplied midspan.
NONO
NO
TICETICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .
6