Filter
Top Products
Audio Authority AVAtrix, 1156 and 1166 User Manual 7
701-12362C
RS-232 CONTROL
IN
IR
OUT
18V DC
POWER
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
Y
Pb
Pr
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
L
R
COAXIAL
OPTICAL
DIGITAL
AUDIO
DVI VIDEO
VIDEO
VIDEO
Manufactured in the USA by Audio Authority Corporation, Lexington Kentucky • 800-322-8346 or 859-233-4599 • www.audioauthority.com
FLASH CARD
High Definition AutoSelector
654321
FLASH CARD PORT
Save and load setup
files or use to upgrade
firmware
RS-232 PORT
Control 1166 behavior
using a remote control
system
INFRARED IN
Control 1166 behavior
using separate control
signals
INFRARED OUT
Used only with
1170 or 1176 and
compatible IR products
(see Appendix A)
POWER JACK
Use only the included
18V power supply
DVI VIDEO MAIN OUPUT
DVI input signals and converted YPbPr input
signals are available on the DVI output
DIGITAL AUDIO OUTPUT JACKS
All digital audio inputs are available at the
coaxial and optical outputs
COMPONENT VIDEO JACKS
Component video input signals
are available on YPbPr jacks
LEFT/RIGHT AUDIO OUTPUT JACKS
Left and right analog audio input signals
are available on these output jacks
DVI VIDEO INPUT*
DVI input port for position 1
DIGITAL AUDIO INPUT JACKS
Optical OR coaxial inputs for position
1 (DO NOT connect both digital audio
outputs from the same source)
LEFT/RIGHT ANALOG AUDIO INPUT JACKS
Connect to every source for proper
Signal Sensing AutoSelection functionality
COMPONENT VIDEO INPUT
YPbPr input port for position 1 (these analog
signals are automatically converted to DVI)
MENU KEY
Switches between Resi-
dential and Professional
Modes, or touch while
pressing the knob to
enter the setup menu
NAVIGATION AND ENTER KNOB
Turn knob to navigate on-screen menus,
press knob to enter (press and hold knob
and touch MENU to enter setup mode)
SOFT KEY
Performs the task indicated
on the display (usually
scroll or AUTO on/off)
INPUT SELECTION
Press a key to switch the
corresponding input to the
main output; these keys
are also used for setup
DISPLAY
Press to dim the display
(four brightness levels)
POWER LED
When lit,
power is on
IR WINDOW
Receives infrared
commands
*DVI capability is only available on the Model 1166. DVI signals are not available on 1176 or 1170 Wallplate outputs.