Filter
Top Products
Features
To Set Up a Conference Call
1.
2.
3.
4.
5.
6.
7.
Make call to
first outside number
or
extension.
Press
Conf
after person answers.
The green light next to the line button flashes to signal that the person is
on hold for the conference.
To make next call, press an
ICOM
or
SA
button for an inside call
or an
SA
or
line button
for an outside call.
Dial
number
or
extension;
after the person answers, press
Conf.
See Note.
All partlicipants, including you, are connected.
Press
Conf
again to add another person.
You are separated from the conference while you add the next person,
but participants are still able to talk.
Repeat steps 3, 4, and 5 for rest of
To end conference, hang up.
Note: If you make a dialing error while adding a participant to
a conference, you must hang up and start over.
TO Leave a Conference Temporarily
1. Press
Hold.
Conference participants are still able to converse.
2. To rejoin conference, press
line button
of any conference
participant.
To Drop a Conference Participant
1. Press
Drop.
2. Press
line button
of any conference participant. See Note.
Note: Drop does not work when the conference is on hold.
5-12 Conference