Asus A7V400-MX Home Security System User Manual


 
ASUS A7V400-MX motherboard user guide
2-13
2.5 Advanced menu
Sector
This field configures the number of sectors per track. Refer to the drive
documentation to determine the correct value. To make changes to this field, set
the Type field to [User Type HDD] and the Translation Method field to [Manual].
Transfer Mode
This field selects the UDMA transfer mode. Configuration options: [Auto] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
CPU Type AMD Athlon(tm)
CPU Speed 750MHz
Cache RAM 256K
Current FSB Frequency 100MHz
Current DRAM Frequency 133MHz
DRAM Clock [By SPD]
External Cache [Enabled]
USB Legacy Support [Enabled]
Init Display First [PCI Slot]
AGP Display switch [Auto]
DDR voltage adjustment [Auto]
Chip Configuration
I/O Device Configuration
PCI Configuration
F1 : Help
↑↓↑↓
↑↓↑↓
↑↓
: Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit
→←→←
→←→←
→←
: Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help
Press [Enter] to select
the DRAM clock.
The Advanced menu displays the CPU type, speed, cache RAM, front side bus
frequency and DRAM frequency information. It also contains the following BIOS
parameters.
DRAM Clock [By SPD]
The DRAM clock are set according to the DRAM SPD (Serial Presence Detect).
You can manually set the DRAM clock parameters.
Configuration options: [By SPD] [133] [166]
External Cache [Enabled]
These fields allow you enable or disable the built-in CPU internal and external
cache. Configuration options: [Disabled] [Enabled]
USB Legacy Support [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. When enabled,
this item allows the system to detect a USB device at startup. When you set this
field to [Disabled], the USB controller legacy mode is disabled whether or not you
are using a USB device. Configuration options: [Disabled] [Enabled]