Filter
Top Products
NetShelter SV User Manual18
Cable Management
Route, secure, and organize cables using the multiple cable access openings on the cabinet roof, sides,
and bottom, the accessory mounting brackets included with the cabinet, plus the variety of cable
management accessories available.
Adjust Vertical 0 U Accessory Mounting Brackets
The vertical 0 U accessory mounting brackets (four included) provide toolless mounting capabilities for
Schneider Electric Rack Power Distribution Units (PDUs) and cable management. They also provide tie-
off locations for cables.
The factory-default position for the vertical 0 U accessory brackets is in the rear of the cabinet. The
brackets are positioned for full-height vertical Rack PDUs.The bracket can be moved up or down to
accommodate different accessories. Additional brackets are available for purchase as requirements
change.
1. Use the Torx
®
T30/#2 Phillips wrench (provided) to remove the two T30 screws.
2. Move to the desired position, and reinstall the brackets.
ns2018a