Filter
Top Products
NetShelter SV User Manual16
2. Move the mounting flange to the desired location and reinstall the T30 fastener at the top, middle
and bottom to secure the vertical mounting flange.
3. Perform the vertical mounting flange adjustment to the opposite side of the cabinet. Ensure that
the same mounting position is used at the top, middle and bottom. Torque to 28 - 30 in-lb (3.2 -
3.4 N-m).
NOTICE
Verify that all Vertical Mounting Flanges are properly aligned before installing equipment
in place.
ns2015a
ns2016a