NetShelter SV User Manual14
Equipment Installation
Adjust Vertical Mounting Flanges
Vertical mounting flanges come factory-installed in the proper location for use with rack-mountable
equipment. The mounting flanges are adjustable towards the front or the rear of the cabinet to fit
different rails or equipment with other depths to accommodate a wide variety of networking and
telecommunications equipment.
Adjustable Vertical Mounting Flange
NOTICE
NetShelter SV cabinets are intended for use with Listed equipment. If you install un-Listed
equipment, you should evaluate the safety of your configuration.
Cabinet Depth Factory Installed Minimum Depth Maximum Depth
1000 mm 678 mm (26.7 in.) 168 mm (6.6 in.) 718 mm (28.3 in.)
1060 mm 738 mm (29.1 in.) 168 mm (6.6 in.) 778 mm (30.6 in.)
1200 mm 738 mm (29.1 in.) 258 mm (10.2 in.) 918 mm (36.1 in.)
NOTICE
If the vertical mounting flanges are adjusted from their factory mounting position more
than 60 mm (2.4 in.), the vertical mounting flanges attach to the cabinet side brace using
cage nuts and fasteners. Refer to the instructions on page 15.
ns2013a