Filter
Top Products
15InRow RD 10 kW Air Cooled Operation and Maintenance
Using the Path statement
Select the main- and sub-menu options specified in the path statement to view or configure a setting. The
path statement lists the main- and sub-menu items you select to navigate to the item to view or modify.
The parts of the path statement are defined below:
Path: Main > Set Password > Change Passwords
Main >
Your starting point is the main menu.
Set Password > Scroll to and select this option from the main menu.
Change Passwords > Scroll to and select this option from the sub-menu.
Subsequent options are listed and defined under the path statement.
Password entry
The cooling unit has two levels of password protection:
• Device password allows Device Users to change basic and environmental settings.
• Admin password allows all privileges granted for Device Users, and also allows the
Administrator to modify settings that control the components in the cooling unit or change
advanced options.
When you try to change a setting, the display interface prompts you to enter your Admin password. The
default value for both the Device and Admin password is apc (lowercase). To enter your password, use
the up or down arrow key to scroll through the available character set. Press the
ENTER key to select the
current character and move the cursor to the next character position. After selecting the last character of
your password, press the
ENTER key once more to submit your password.
Once the password is entered, it remains in effect until the period of inactivity exceeds the Password
Timeout setting.
See “Timeout” on page 23.
Note: Passwords are case-sensitive.
Start the cooling unit
Path: Main >On/Standby
To start the cooling unit, change the setting to On by pressing the ENTER key to toggle from Standby to
On. The fans will start.
The cooling unit will run according to the configured settings.
Note: On/Standby only affects the local cooling unit. You must set the On/Standby option
for each cooling unit in the cooling group.
Note: To toggle between On and Standby from the scrolling status screens, press the
ENTER
key three times in rapid succession.