Filter
Top Products
USER MANUAL
ENGLISH
146 2598 000(1)2005-03 A FLOORTEC R 360 P 11
MAINTENANCE
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following chart provides the scheduled maintenance. The intervals indicated can be changed to suit working
conditions. These must be defined by the person in charge of the maintenance..
All scheduled or extraordinary maintenance operations must be performed by qualified personnel, or by an authorised
Service Center.
This Manual describes only the easiest and most common maintenance procedures.
SCHEDULED MAINTENANCE TABLE
(1): And after the first 8 running-in hours.
(2): or before use
(3): For the relevant procedure, refer to the Service Manual.
(4): Or every year
(5): Or more often in dusty areas
(6): maintenance operations to be performed by an authorized Honda Dealer, unless the Operator has the service equipment and data and
feels qualified for such operations
(7): For the related procedure, see the Petrol Engine User Manual
(8): If considered necessary by the person in charge for the maintenance
(9): or every 300 hours, if necessary.
WARNING!
To carry out maintenance operations, switch off the machine (remove the key from the ignition switch)
and, if necessary, disconnect the battery. Moreover, carefully read the instructions in the Safety
chapter.
NOTE
For other maintenance procedures included in the Scheduled Maintenance table, see the User's Manual for
the petrol engine and/or refer to the authorised Service Centers.
Maintenance operation On delivery
Every 10
hours (1)
First month or
after 20 hours
(1)
Every 50
hours (1)
Every 100
hours (1)
Every 200
hours (1)
Every 400
hours (1)
Every 2
years
Battery fluid level check (2)
Engine oil level check (2) (7)
Engine air filter check (2) (7)
Side and main broom height check
Dust filter cleaning and integrity check (2)
Engine oil change (7) (4) (7)
Engine air filter cleaning (5) (7)
Skirt height and operation check
Filter-shaker operation check (3)
Hood safety switch operation check
Main broom and drive belt visual inspection (3) (3)
Petrol engine ignition spark plug
check/cleaning
(7)
Petrol tank and filter cleaning (6)
Nut and screw tightening check (3) (1)
Petrol engine speed check (3)
Service and parking brake check and
adjustment
(3)
Main broom and drive belt replacement (3) (8)
Engine air filter replacement (5) (7)
Petrol engine ignition spark plug
replacement
(4) (7)
Engine valve clearance check/adjustment (6)
Engine combustion chamber cleaning (6) (9)
Starter-dynamo and drive motor carbon
brush check and replacement
(3)
Petrol pipe check/replacement (6)