Filter
Top Products
1-12 American-Lincoln Technology
114 RS Operator’s Manual
FOOT PEDAL-See Figure 3
The accelerator and directional control foot pedal is located on the floor of the operator’s area. The accelerator and
directional control pedal controls the machine direction, travel speed and dynamic braking. If the machine stops due to
an electrical system overload in the power panel controller, allow the pedal to return to the neutral position. Reset is
automatic when the controller cools.
For Forward Travel - Foot pressure on the upper portion of the pedal will cause the Sweeper to move forward. Increase
the foot pressure on the upper portion of the pedal to increase the forward speed.
For Reverse Travel - Put foot pressure on the lower portion of the pedal. The machine will move in reverse. Increase the
foot pressure on the lower portion of the pedal to increase the reverse speed.
To Stop the Sweeper - Allow directional control pedal to return to neutral (center position). Pedal will automatically return
to centered position, which will automatically provide dynamic braking to stop. If Increased Braking action is desired put
light foot pressure to the pedal in the opposite direction of travel until the sweeper stops then allow the pedal to return to
center.
WHEEL LOCK - See Figure 4
The Wheel Lock is used to prevent unexpected movement
of the machine while it is “Parked” for Storage purposes or
being serviced, such as emptying the hopper. The Wheel
Lock is not to be used as a “Brake.” To engage the wheel
lock, Stop the Sweeper, move the lever out of the indent,
and push it forward. The wheel lock will engage with the
lever in the forward position.
WARNING
The Wheel Lock is not to be used as a “Brake.” Make
sure the sweeper has come to a complete stop before
engaging the wheel lock. Personal Injury or Property
Damage Can Result From Using the Wheel Lock as a
“Brake.”
WARNING
Turn the Key Switch “Off” and engage the Wheel Lock
before Leaving the Operator’s Compartment. Do Not
Leave the Sweeper Unattended.
MACHINE CONTROLS
REVERSE
NEUTRAL
NEUTRAL
FORWARD
VOLTAGE LOW
BROOMSARE OFF
RECHARGE BATTERIES
W
H
E
E
L
L
O
C
K
LOCK
UNLOCK
P4066 FIGURE 3
C0466 FIGURE 4