Filter
Top Products
Illustration 3.6: Step 5 of 7: Country Setting
Note:
If the initial and confirmation settings are different,
• country selection is cancelled
• the wizard recommences step 5
If initial and confirmation settings match, but are incorrect, contact service.
To change the country setting later, refer to
Setup, Setup Details.
Step 6 of 7: Replication
To replicate the settings from steps 1 to 6 to other inverters in the same network
• Select inverters
• Click [Replicate]
Note:
When the PV configuration, installed PV power and PV array area of follower inverters in the
network differ from that of the master, do not replicate. Set up the follower inverters individ-
ually.
3. Web Server Quick Guide
16 8000038784_00_BAL_en / L00410565-01_02
3