Filter
Top Products
Menu Structure - Setup - Continued
Display Functions Description
GPRS connection setup
SIM PIN code: 0000 4-8 characters
Access point name:
name Max. 24 characters
User name:
user Max. 24 characters
Password:
password Max. 24 characters
Roaming: Disabled
[-] Data warehouse service
Upload channel: LAN
Upload time (h:m): 14:55
Start log upload Requires data from at least 10 min. of energy production
D.W FTP server address:
www.inverterdata.com
D.W server port: 65535
FTP mode: Active
D.W. server user name: Default serial number of the inverter
User User name for Data warehouse account, max. 20 chars.
D.W server password
Password Password for Data warehouse account, max 20 chars.
[-] Autotest Initiate autotest, only applicable with country setting; Italy
Status: Off
Ugrid: 234 V Only visible during voltage tests
Utest: 234 V Only visible during voltage tests
Fgrid: 50.03 Hz Only visible during frequency tests
Ftest: 50.03 Hz Only visible during frequency tests
Disconnection time: 53 ms Not visible in Off and Completed OK states
[-] Logging
Interval: 10 min
*
The interval between each logging
Logging capacity:
10 Days
[-] Web Server
Reset password Resets the password of the Web Server to its default value
[-] Security
Password: 0000 Level of access to inverter parameters and settings
Security level: 0 Current security level
Log out Log out to security level 0
[-] Service logon Only to be used by authorised service personnel
User name:
user name
Password:
password
Table 2.8: Setup - Continued
*) Not available.
Note:
When a value is set in the S0 energy meter calibration menu the inverter disables its own
energy counter in order to show the value from the S0 meter. Therefore the energy count
will not be shown if a value is set, even though no S0 meter is connected.
2. Display
8000038784_00_BAL_en / L00410565-01_02 11
2