Filter
Top Products
3Mt Tattle-Tapet Security Strips
3M Library Security System
5-10
E 3M 1999 September
5.5 Video Cassette Protection —
3Mt
tt
t Tattle-Tapet
tt
t Security Strips:
DVM-1
Description/Characteristics
The 3Mt Tattle-Tapet DVM-1 Video Cassette
Security Strip and cover label are designed to be
applied directly on video cassettes.
Once applied, discreet protection and full circulation
of video cassettes are provided for the life of the
marked items.
Security strips on protected cassettes m ust be properly
desensitized so the cassettes can be carried through
the detection system without causing an alarm.
Security Strip Application
The 3M Tattle-Tape DVM-1 security strips should be
applied and stored away from areas which are readily
accessible t o patrons.
Security strips should be applied only to surfaces
which are flat, clean, dry and at room temperature. For
maximum adhesion, minimize touching the adhesive
surface of the security strips.
Marking Video Cassettes
1. Remove the liner from the security strip.
2. Apply the security strip near the edge of the
recessed area on the top of the video cassette.
DVM-1
3. Verify the strip is properly positioned. Press along
the length of the security strip to secure it to the
cassette.
4. Do not place the strip in the middle of the
recessed area.