Filter
Top Products
3M Library Security System
3M Accessories
4-15
E 3M 1999 September
Operating Instructions
Resensitizing Security Strips
Turn the Model 951 on at least six inches [150 mm]
from the 3Mt Tattle-Tapet Security Strip.
Pass the resensitizer slowly along the object where the
security strip is located. Continue beyond the security
strip before turning the resensitizer off.
3inches
76mm
1second
1segundo
The center of the Model 951 must pass directly over
the security strip and no farther than1/4 inch [6 mm]
above the strip.
The recommended duty cycle for the Model 951 is
one minute on and five minutes off.