Filter
Top Products
3M Library Security System
3M Accessories
4-5
E 3M 1999 September
Security Strips Used with 3Mt
tt
t Desensitizer Model
930
3Mt Tattle-Tapet Security Strips
102
103
B1 (DS-B1-N)
B2 (DS-B2-N)
DCD-2
Security Strip Application
Security strips should be applied only to surfaces
which are flat, clean, dry and at room temperature. For
maximum adhesion, minimize touching the adhesive
surface of the security strips.
The 3M Model 930 should be installed away from
areas which are readily accessible to customers.
Never leave a desensitizer unattended. Access
to a desensitizer may allow your security sys-
tem to be defeated.
Typical Items Used with 3M Model 930
Desensitizer
Books
Magazines
All general items — excluding recorded magnetic
media.
Exceptions
Keep credit cards, recorded magnetic media
(audio tapes, video tapes or computer disks)
and stem-wind and self-wind wrist watches at
least six inches [150 mm] away from the 3M
Model 930 surface to prevent magnetic
damage.
A yellow warning label is supplied by 3M and
should be secured on or near the 3M Model
930 to advise customers of potential damage to
recorded magnetic media.
Keep a minimum of 12 inches from computers
and computer displays (CRTs).
Security Strip Storage Conditions
Store security strips at 50° -- 9 0 °F[10° -- 3 2 ° C] and at
20 -- 70% relative humidity.
Store security strips in a clean area and out of direct
sunlight. Rotate stock.
Store security strips at least two feet [0,6 m] away
from the 3M Model 930.