Filter
Top Products
3M Library Security System
3M Accessories
4-29
E 3M 1999 September
Service
In the U.S.
, the Model 764 is not serviced at the
customer site. If a unit fails, it is replaced. When the
replacement unit is received, the user packages the
failed unit in the shipping carton and returns it to 3M.
For assistance or more information on this program,
please call the 3M National Service Center, 1 (800)
328-0067.
International users
should call the 3M subsidiary in
their area for information on local service.
Security Strips Used with the 3Mt On-Counter
Resensitizer Model 764
3Mt Tattle-Tapet Security Strips
B1
B2
DCD-2
Security Strip Application
Security strips should always be applied to surfaces
which are flat, clean, dry and at room temperature. For
maximum adhesion, minimize touching the adhesive
surface of the security strips.
Cleaning
Remove dirt and greasy buildup using towels or soft
cloths which have been dampened with a grease
cutting cleaner. Rub on the surface until clean and
wipe dry.
Typical Items Used with the 3M On-Counter
Resensitizer Model 764
Books
Magazines
Periodicals
Compact discs
Exceptions
Keep credit cards, recorded magnetic media
(audio cassettes, video cassettes, computer
software), stem-wind and self-wind wrist
watches at least 6 inches [150 mm] away from
the 3M Model 764 surface to prevent magnetic
damage.
Security Strip Storage Conditions
Store security strips at 50° -- 9 0 °F[10° -- 3 2 °C] and at
20 -- 70% relative humidity.
Store security strips in a clean area and out of direct
sunlight. Rotate stock.
Never leave a desensitizer unattended. Access
to a desensitizer may allow your security sys-
tem to be defeated.