2.1.3 LED Indications
WGSW-2840:
LED Color Function
PWR Green Lights to indicate that the Switch is powered on.
SYS Green Lights to indicate the system is working.
LNK/ACT Green Blink to indicate that the switch is actively sending or receiving data over that
port.
Speed Orange Lights to indicate the link through that port is successfully established.
WGSW-5240:
LED Color Function
PWR Green Lights to indicate that the Switch is powered on.
SYS Green Lights to indicate the system is working.
LNK/ACT Green Lights to indicate the port is linked.
Blinks to indicate that the switch is actively sending or receiving data over that
port.
2.1.4 Switch Rear Panel
Figure 2-2 shows the rear panel of the switch
Figure 2-3 WGSW-2840 rear panel
Figure 2-4 WGSW-5240 rear panel
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks
should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also help to protect your switch from being
damaged by unregulated surge or current to the Switch or the power adapter.
2.2 Install the Switch
This section describes how to install the Ethernet Switch and make connections to it. Please read the
following topics and perform the procedures in the order being presented.
