3.4 Telnet login
The switch also supports telnet for remote management. The switch asks for user name and password
for remote login when using telnet, please use “admin” for username and “admin” for password.
3.5 Commands
There are two levels for console commands. The first level provides commands to show system
informations and current configurations. The second level (privileged mode) provides commands to set,
clear and show the configuration.
3.5.1 First level commands
The follow table lists the first commands and the equivalent usages.
Command Description
enable Enable privileged mode
show channel Show channel information
show console-info Show console-info
show igmp-snooping Show igmp snooping information
show ip http server Show http server information
show ip telnet server Show telnet server information
show mirror Show mirror information
show multicast router Show multicast router port information
show port counter Show port counter information
show port rate-shaping Show port ingress and egress rate-shaping
show port spantree Show spantree information on ports
show port state Show port infomation
show port storm-limit Show port storm limit mode and rate
show qos map cos-queue-map Show qos map cos-queue-map
show qos map dot1p-cos-map Show qos map cos-queue-map
show qos map mac-cos-map Show qos map mac-cos-map
show qos map port-cos-map Show each port's cos
show qos map vlan-cos-map Show qos map vlan-cos-map
show qos queue egress-policy Show qos queue egress-policy
show security MAC-aging Show MAC aging time
show security filter-MAC Show MAC filter entry
