clear security static-MAC Clear static MAC entry
clear snmp community Clear snmp community entry
clear snmp trap Clear snmp trap management host
clear spantree root Restore spanning tree parameters
clear trunk Clear trunk port from vlans
clear vlan Clear member from vlan
copy config flash Copy system configuration parameters to default value
clear port storm-limit Clear strom limit of all ports
clear qos map cos-queue-map Reset cos-queue map to default
clear qos map dot1p-cos-map Reset dot1p_cos map to default
clear qos map mac-cos-map Clear qos map mac-cos-map
clear qos map vlan-cos-map Clear qos map vlan-cos-map
clear security filter-MAC Clear MAC filter entry
clear security static-MAC Clear static MAC entry
clear snmp community Clear snmp community entry
clear snmp trap Clear snmp trap management host
clear spantree root Restore spanning tree parameters
clear trunk Clear trunk port from vlans
clear vlan Clear member from vlan
3.5.2.2 Copy command
Once the configuration is changed, it remains the original after a reboot unless the configuration is saved.
Copy command is to save the current configuration to the flash, this saves the configuration to next
reboot.
Command Description
copy config flash Copy system configuration parameters to flash
3.5.2.3 Disable command
Disable command is to exit the privileged mode and back to the first level of command line interface.
Command Description
Disable Disable privileged mode
3.5.2.4 Reboot command
Reboot command is to reboot the switch, please beware to check if the configuration is saved..
Command Description
Reboot Reboot system
