WR3000 4-Port Wireless DSL/Cable Router
®
164
Problems with the Ethernet Interface - Troubleshooting the Ethernet Interface
LEDs on the front panel are off, check the Ethernet cable connection
LEDs on the front panel are off, check the Ethernet cable connection
between your WR3000 Wireless Router and the computer connected to the
Check for faulty Ethernet cables. Make sure the computer’s Ethernet adapter is
installed and working properly.
Verify that the IP addresses and the subnet masks of the WR3000 Wireless Router
and the computer are on the same subnet.
LEDs on the front panel are off, check the Ethernet cable connection
LEDs on the front panel are off, check the Ethernet cable connection
between your WR3000 Wireless Router and the computer connected to the
Verify that the IP addresses and the subnet masks of the WR3000 Wireless Router
Verify that the IP addresses and the subnet masks of the WR3000 Wireless Router
and the computers are on the same subnet.
Problems with the WAN Interface - Troubleshooting the WAN Interface
The ISP provides the WAN IP address after authenticating you. Authentication may be
The ISP provides the WAN IP address after authenticating you. Authentication may be
through the user name and password, the MAC address or the host name.
The username and password apply to PPPoE and PPTP encapsulation only. Make
sure that you have entered the correct
sure to use the correct casing). Refer to the
chapter (Web Confi guration
Clone the MAC address from your computer on the LAN as the WR3000 Wireless
Clone the MAC address from your computer on the LAN as the WR3000 Wireless
Router’s WAN MAC address. Refer to the
chapter (Web Confi guration
chapter (SMT). It is recommended that you
clone your computer’s MAC address, even if your ISP presently does not require MAC
Confi gure your computer’s name as the WR3000 Wireless Router’s system name.
chapter (Web Confi guration Utility) or the
