WR3000 4-Port Wireless DSL/Cable Router
®
129
Chapter 16:
Maintenance
This chapter displays system information such as fi rmware,
port IP addresses and port traffi c statistics.
16.1 Maintenance Overview
The maintenance screens can help you view system information, upload new fi rmware, manage
confi guration and restart your WR3000 Wireless Router.
16.2 System Status Screen
screen, where you can use to monitor your
screen, where you can use to monitor your
WR3000 Wireless Router. Note that these fi elds are READ-ONLY and are meant to be used for
The following table describes the information in the SYSTEM STATUS screen:
you enter in the fi rst Internet Access Wizard screen. It is for
you enter in the fi rst Internet Access Wizard screen. It is for
you enter in the fi rst Internet Access Wizard screen. It is for
This is the fi rmware version and the date created.
This shows the routing protocol -
for which the WR3000 Wireless Router is confi gured.
for which the WR3000 Wireless Router is confi gured.
This is the WAN port IP address.
This is the WAN port subnet mask.
This is the WAN port DHCP role -
This is the WAN port DHCP role -
This is the LAN port IP address.
This is the LAN port subnet mask.
This is the LAN port DHCP role -
This is the LAN port DHCP role -
to see router performance statistics such as number of packets sent
and number of packets received for each port.
Show Statistics
System Name:
ZyNOS Firmware Version: V3.50(HF.1)b3 09/29/2003
Routing Protocols:IP
WAN Port:
IP Address: 0.0.0.0
IP Subnet Mask: 0.0.0.0
LAN Port:
IP Address:192.168.150.1
IP Subnet Mask: 255.255.255.0
DHCP: Client
DHCP: Server
SYSTEM STATUS
