52
Chapter 2 More Menus Features
Copying Originals with Saddle-Stitch Binding (Booklet)
zOriginals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 60 originals)
zSaddle-stitch binding is possible only when the optional 1Bin Saddle-Stitch Finisher (DA-FS405W) is installed.
Ledger (11" x 17"), Legal (8.5" x 14"), and Letter-R (8.5" x 11") are the only applicable paper sizes (legal size
can be selected only when printing from computer).
zThe standard setting for the copy size is the reduced size, however, the setting can be changed to the original
size. Refer to Copier Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
z
When the fold position does not match with the center position of the copies, set the binding margin. Refer to
General
Settings
(Key Operator Mode)
in the Operating Instructions (For Function Parameters) of provided CD-ROM.
zStamping can be combined with the Booklet function. For copying with stamp, refer to Copying with Stamping
(see pages 74 to 82).
1
Select “2-Sided / Original->Copy”,
and then select “Booklet”.
zTo display this screen, refer to steps 1 to 3 of
Basic Operation for the 2-Sided Copy
Mode (see page 42).
zWhen “Multi-Size Feed” is selected,
“Booklet” cannot be selected.
2
Select “1 Sided” or “2 Sided” for the
original.
