40
Chapter 1 Basic Menu Features
Completion Notice
If the Completion Notice is set, you will be notified on your computer when copying is completed.
zBefore using this function, install the Panasonic Document Management System and Printer Driver, and
then configure each software.
zTo register the IP Address of your computer, refer to Network Scanner Settings and Completion Notice
Function in the Operating Instructions (For User Setup) of provided CD-ROM.
1
Place original(s).
zRefer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features if necessary.
4
Select “Completion Notice”.
5
Select an index tab or “Favorites” to
display the registered computers.
6
Select a designated computer, and
then select “OK”.
7
Enter the desired number of copies.
8
Press the Start key.
zWhen copying from the Platen Glass, place
the next original, and follow the instructions
described on the Touch Panel Display.
zA completion notice will be sent to the
specified computer when copying is
completed.
zAfter finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
