43
Chapter 2 More Menus Features
Copying 1-Sided Originals onto 2-Sided Sheets
Two 1-sided originals can be copied onto one 2-sided sheet. The 1st original’s image is copied onto the
front side and the 2nd original’s image is copied onto the back side of the sheet.
1
Select “2-Sided / Original->Copy”,
and then select “1 -> 2”.
zTo display this screen, refer to steps 1 to 3 of
Basic Operation for the 2-Sided Copy
Mode (see page 42).
2
Select the Orientation of the original.
3
Select the bind position, and then
select “OK”.
zWhen setting “Edge” or “Margin” in the 2-
Sided copy mode, the printing position may
differ on each side of the paper. Refer to
Effect Modes (see page 68).
zFor the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode (see page 42).
Select for the original in
portrait orientation.
Select for the original in
landscape orientation.
Long Edge:
Copies both sides of
original aligning to the long
edge of the original.
Short Edge:
Copies both sides of
original aligning to the short
edge of the original.
