10
Chapter 1 Basic Menu Features
Copying with Preset Ratios (Reduction/
Enlargement)
You can easily enlarge or reduce the copy size by selecting the preset size with the Copy Size buttons.
zTo change the assigned paper size of Copy Size buttons, select “Paper/Output Tray” and modify the settings.
For setting the paper size and media type for Paper Trays, refer to General Settings (Key Operator Mode) in
the Operating Instructions (For Function Parameters) of provided CD-ROM.
1
Place original(s) in Landscape
Orientation.
zRefer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select a Copy Size.
Ex:Enlargement
Original Size: 8.5" x 11" (Letter-R)
Copy Size: 11" x 17" (Ledger)
The exact ratio (%) is automatically selected.
(%)
(Legal: 8.5" x 14")
zPaper Tray will be selected according to the
copy size.
zWhen the desired size of paper is not set in
the Paper Trays, use the Sheet Bypass. For
using the Sheet Bypass, refer to Adding
Paper <Printing Media> in the Operating
Instructions (For Maintenance) of provided
CD-ROM.
4
Enter the desired number of copies.
5
Press the Start key.
zAfter finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
Ex: Enlargement
8.5" x 11" (Letter-R)
Ex: Reduction
11" x 17" (Ledger)
11" x 17" (Ledger) 8.5" x 11" (Letter-R)
Original
Size
(Landscape)
Copy Size (Landscape)
11" x 17"
Legal
8.5" x 11" 5.5" x 8.5"
11" x 17" 100 77 65 50
Legal 121 100 79 61
8.5" x 11" 129 100 100 65
5.5" x 8.5" 200 155 129 100
