7
Controls, displays and connections
This section provides a brief description of all the controls,
displays and connections. The button symbols presented
here can also be found in the description of the operating
steps.
View of front panel (fl ap folded down)
View of rear panel
Front panel controls and displays
1. On/Off switch (with mains disconnect)
2. TV/R button for switching between TV
and radio mode
3. 16-character alphanumeric display for
channel names, radio data etc.
4. Channel down button
5. Channel up button
Rear panel controls and displays
1. LNB input
2. LNB loop-through input
3. Electrical data stream output (SPDIF/
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
4. Optical data stream output (SPDIF/
Sony Philips Digital Interface Format)
for Dolby Digital AC 3 audio
5. Audio outputs (L/R) - cinch sockets
6. Scart socket for TV connection
7. Scart socket for VCR connection
8. 6-pin modular socket with RJ 11 port for
serial data transfer in service mode or
connection for remote infrared receiver
9. Mains power cable
Data cable
Receiver modular
socket (
) Connection
sequence
PC Connection
sequence
Pin 6 = RXD RXD
Pin 5 = TXD TXD
Pin 2 = GND GND
