A SERVICE OF

logo

10
Hunter Fan Company 41895-01 • 10/14/05
11
41895-01 • 10/14/05 Hunter Fan Company
8 • Assembling the Blades
8-1. Insert grommets into the holes in the blades.
8-2. Note: If available, use a magnetic tip screwdriver.
Attach each blade to the blade iron and medallion using the three
blade assembly screws. Insert the assembly screws into the blade
iron, through the blade and into the medallion, with the blade
captured between the blade iron and medallion. e blades may
appear slightly loose after screws are tightened. is is normal.
Step 8-1
Grommet
Step 8-2
Blade Assembly
Screw