Option Explanation
Global
Key
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when switching between appli-
cations. The Global Key default key sequence must be defined by the AppLock Administrator. The Global key is pre-
sented to the end-user as the Activation key.
Global
Delay
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting to run after reboot.
Delay (Global) may not be available in all versions of AppLock. You can simulate a Global Delay function by setting
a delay for the first application (lowest Order) launched and setting the delay to 0 for all other applications. See Boot
Options.
Input
Panel
Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When enabled the input
panel cannot be enabled or disabled for each individual application, and is available to the user for all configured
applications.
Clear
Button
Tap the Clear button to clear all currently displayed Filename or Application information. The Global settings are not
cleared.
Scroll
Buttons
Use the left and right scroll buttons to move from application setup screen to application setup screen. The left and
right buttons update the information on the screen with the previous or next configured application respectively.
Launch Button
Note: The Launch button may not be available in all versions of Multi-AppLock. Contact Technical Assistance for
assistance, downloads and AppLock update availability.
When clicked, displays the Launch options panel for the Filename selected on the Administration panel.
Note: Launch order is determined by the Order specified in the Application tab. The Order value does not have to be
sequential.
4-37
