A SERVICE OF

logo

Ch 3: Installing Optional Devices
Hitachi PC VisionBase8450H/R Server 93
After installing the board, connect the IMB interface cable with the system equipment. Also connect the power
unit (attached to the SVP board) with the board.
NOTE: Before connecting the IMB interface cable, remove the memory platter board.
6. Insert the claw of the memory bracket into the guide holes on the system equipment, then fix it with mounting
screws.
7. Pull the master board bracket to the back, then fix it with two mounting screws.
Removing extended boards
Remove extended boards in the reverse procedure to their installation.
IMB interface cable
IMB connector
Power unit
7
7
6
Memory bracket
Guide hole
Master board bracket