A SERVICE OF

logo

Ch 3: Installing Optional Devices
Hitachi PC VisionBase8450H/R Server 43
Removing the Panel Cover
When installing a SCSI device into extended storage bays 7 to 9, remove the panel cover. Before removing the panel
cover, you need to remove the front door.
1. Open the front door 90 degrees or more, then extract it by lifting it a little.
2. Remove six mounting screws from the front of the system equipment.
3. Extract the panel cover by pulling it to the front.
NOTE: While removing the panel cover, keep the storage bay door open.
Guide hole
Protrusion
Hinge
Front door
1
2