3. MENU SETTINGS
3-4
2. Select an item, and press the [ENT] key to show the setting window.
Refer to the table in below to enter the dimensions.
3. Press the [MENU/ESC] key to close the menu.
3.2.3 How to enter offset values
1. Press S to select [Offset Data], and [ENT] key to show the Offset Data menu.
2. Select [Trim], and press the [ENT] key.
3. Enter the offset value for inclined angle, and press the [ENT] key (setting range: -12.5 to
+12.5°, +: rise at bow).
4. Press T to select [Heel], and press the [ENT] key.
5. Enter the offset value for the heel, and press the [ENT] key (setting range: -12.5 to +12.5°, +:
rise at port).
6. Press T to select [XDCR], and press the [ENT] key.
Item Meaning Setting range
LOA Ship’s length 50.0 to 400.0 m
B Ship’s width 5.0 to 100.0 m
L1 Horizontal distance from the ship’s bow to transducer 0.0 m to the setting value for “LOA”
L2 Horizontal distance from port to transducer 0.0 m to the setting value for “B”
L3 Horizontal distance from sip’s bow to GPS antenna 0.0 m to the setting value for “LOA”
L4 Horizontal distance from port to GPS antenna 0.0 m to setting value for “B”
L5 Horizontal distance from ship’s bow and CCRP (bridge) 0.0 m to setting value for “LOA”
D Horizontal distance between transducers for DS-60 and
echo sounder.
0.0 m to (“LOA”-”L1”)
