12 SPARC Enterprise Mx000 Servers Administration Guide • November 2007
▼ To Log in Initially to the XSCF Console
This procedure can be used for initial login or for lost password access.
1. Log in to the XSCF console with the default login name from a terminal device
connected to the Service Processor
1
. You must have physical access to the
system.
You are prompted to toggle the Operator Panel MODE switch (keyswitch) on the
front of the system. The location of the MODE switch on a midrange server is
shown in
FIGURE 2-1. The MODE switch on a high-end server is mounted
horizontally rather than vertically, as shown in
FIGURE 2-2. The MODE switch has
two positions: Service and Locked.
1. Fordetailsonserialportconnections,seetheInstallationGuideforyourserverortheSPARCEnterprise
M4000/M5000/M8000/M9000ServersXSCFUser’sGuide.
serial port log-in prompt: default
