WinCHAP User’s Manual The NOAH 3 Module 111
8.7 Incorporating the NOAH 3 Module into your practice
The following are some suggestions on how to use WinCHAP in your clinic.
8.7.1 If you have a FONIX analyzer and non-FONIX audiometer
We recognize that many FONIX users have FONIX analyzer and non-FONIX
audiometers. Here are some suggestions on how to incorporate WinCHAP into
such a situation.
8.7.1.1 Create client information and audiogram in NOAH 3
1. Create new client file in NOAH 3.
2. Create the audiogram in NOAH 3, using your non-FONIX audiometer.
3. Open the WinCHAP module in NOAH 3. See Section 8.2.2.
4. Select client’s NOAH audiogram in NOAH Audiograms Section and
export that audiogram to WinCHAP. See Section 8.3 for details.
8.7.1.2 Send Insertion Gain Target to FONIX analyzer
1. From the WinCHAP NOAH Module, select the WinCHAP Audiogram tab.
This displays a list of all the audiograms saved in WinCHAP.
2. Select the audiogram from which you want to create a target. This will
open the WinCHAP Audiogram Window with that audiogram displayed.
3. See Section 5.5.1 and 5.5.2 for instructions on how to send an audiogram
to your analyzer and how to create an insertion gain target and send it to
your analyzer.
8.7.1.3 Enter the hearing aid into the WinCHAP database
If you want to save measurement curves to WinCHAP, you must first enter the
hearing aid being measured into the WinCHAP database and assign the aid to
your client.
Use the instructions found in Section 3.2.2 or Section 3.3.2 to enter the hearing
aid into the database using either the Quick Entry Hearing Aid window or the
Office Manager, respectively.
8.7.1.4 Save the measurement curves
1. Open a hearing aid test window by either:
• From the Test Menu, click on the hearing aid listed under the client’s
name.
• From the WinCHAP Audiogram Window, click Client & Test Info and
double-click on the hearing aid.
