WinCHAP User’s Manual Hearing Aid Measurements 101
• In the SPL screen, set AUTO SAVE AIDED CURVES to YES in the Menu.
(The 6500-CX must have software version 4.71 and above):
– SPL Aided 1
– SPL Aided 2
– SPL Aided 3
If you would like to grab only specific curves, or if you would like to grab refer
-
ence curves:
1. Open the Tools menu.
2. Select 6500-CX Multicurve.
3. Select which curves you would like to grab.
4. Click
Save.
5. Click
Back to close the window.
6. Click Get Curves. This will get the curves selected in step 3.
FP35 & FP40 7000
• In the Insertion Gain screen: • In the Insertion Gain screen:
– REUR – REUR 1
– Insertion Gain Target – REAR 2-5
– Aided Curve 1 – REIR 6-9
– Aided Curve 2 – Target
– Aided Curve 3
– Insertion Gain 1 • In the SPL screen:
– Insertion Gain 2 – REUR 1
– Insertion Gain 3 – REAR 2-5
– Target
• In the SPL screen (FP40 must have software version 3.50 and above):
– SPL Aided 1
– SPL Aided 2
– SPL Aided 3
