ST VERSION DESCRIPTION ENG
Page 40
13.8 FALCON 15 MENU TREE (ST version)
The menu tree for the Falcon 15 ST-OUT Version is shown on here below. It has all of the possible main menu
items listed along the left side.
The branching sub-menus and parameters are connected in the order they are encountered in the menu system.
The diagram here below displays the complete Falcon 15 menu – please refer to the table on Cap. 2 for Optional
feature list.
|--
MAIN PAGE (Preset, Agc level, Compressor levels, Input Meters)
|--
Input Setup
-- |--
Sensibilty
--
- 12 dBm to+ 12 dBm (1 dB step)
|--
AGC Speed
--
0 to 6 dB/sec (0.2 dB step)
|--
AGC Mode
--
Hold=0 sec & MaxG= 08 dB;
Hold=1 sec & MaxG= 10 dB;
Hold=0 sec & MaxG= 12 dB;
Hold=2 sec & MaxG= 12 dB;
Hold=3 sec & MaxG= 15 dB;
Hold=3 sec & MaxG= 20 dB;
Hold=0 sec & MaxG= 15 dB;
Hold=0 sec & MaxG= 20 dB;
|--
Input Source
--
Analogic / Digital input
|--
Audio Mod. Setup
-- |--
Preemphasis
--
50 uSec Internal / 75 uSec Internal / 50 uSec External
/ 75 uSec External
|--
Output Level
--
- 10 dB to + 14 dBm (0.5 dB step)
|--
Output Mode
--
Normal / Peak Ref Tone / Bypass
|--
Process mode
--
Normal (Stereo) / Mono (Left Input) / Mono (L+R)
|--
Noise Gate
--
Off, - 80 dB to – 51 dB (1 dB step)
|--
Rds Setup
-- |--
Not Installed
--
|--
Serials Setup
-- |--
Serial Port 1
--
Disabled / Enabled
|--
Serial Port 2
--
Disabled / Enabled
|--
System Information
-- |--
Temperature
|--
External Inputs
--
Not Installed
|--
Firmware Version
|--
Firmware Code
