A SERVICE OF

logo

ST VERSION DESCRIPTION ENG
Page 39
13.7 ANALOG AUDIO INPUT (Female XLR)
Balanced XLR-type connectors are used for input analog audio.
The stereo analog inputs are designed for standard 0 dBu balanced signals. Individual
channel gain and level setting is done using the software parameter settings (see par.
12.1).
XLR pinout:
Pin 1 Gnd
Pin 2 Signal
Pin 3 Return
In case of unbalanced connections, please connect the cold pole (Pin 3) to the ground (Pin
1).
Factory preset input impedance is 10 kOhm. This impedance may also be set to 600Ohm
by moving the two internal jumpers on the INPUT / OUTPUT board (see Chapter 19 -
hardware settings).