Operating the Control Panel
SelecType
You can select the built-in character fonts using the SelecType
feature on your control panel when the printer is on line.
0
POWER
0
READY
0
E;ER
0
ON LINE
OFF LINE
L
NLQ
This button is used to select
NLQ Roman and NLQ Sans Serif
fonts, When you select Roman,
the beeper sounds two times.
When you select Sans Serif, the
beeper sounds three times.
DRAFT
This button is used to select
draft printing. When you select
draft, the beeper sounds once.
CONDENSED
This button is used to select or
deselect the condensed mode.
When you select the condensed
mode, the beeper sounds once. In
this mode all characters are
printed at approximately 60% of
their normal width. When you
return to the normal mode, the
beeper sounds twice.
Note: Condensed mode cannot be selected when either of the
NLQ fonts have been selected.
3-4
Using the Printer
